Temperature Specs:

• Working temperature range: at least 5 (UN/UNplus/UNm/UNmplus) or 10 (UF/UFplus/UFm/UFmplus) above ambient temperature
  to +300 °C
• Setting accuracy temperature: up to 99.9 °C: 0.1 / from 100 °C: 0.5
• Setting temperature range: +20 to +300°C
• Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error

• Control Technology:

  • ControlCOCKPIT SingleDISPLAY: Adaptive multifunctional digital PID-microprocessor controller with high-definition
    TFT-colour display
  • Language setting German, English, Spanish, French, Polish, Czech, Hungarian
  • Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
  • Function SetpointWAIT: the process time does not start until the set temperature is reached
  • Calibration: three freely selectable temperature values
  • Adjustable parameters: temperature (Celsius or Fahrenheit), air flap position, program time, time zones,
    summertime/wintertime

  • Safety:

    • Temperature control: mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature and overtemperature monitor TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display
    • AutoSAFETY: additionally integrated over- and undertemperature monitor “ASF”, automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature
    • Auto diagnostic system: for fault analysis

    Electrical data

    208 Volts

    • (+ / – 10%)
    • 3 phases w/o neutral
    • 50/60 Hz / 14.6 amp

    • Stainless Steel Interior:

      • Interior: easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
      • Volume: 449 l
      • Dimensions : 1040 x 720 x 600 mm
      • Max. number of internals: 8
      • Max. loading of chamber: 300 kg
      • Max. loading per internal: 30 kg

      Stainless Steel

      For many years exterior textured stainless steel has been the unmistakable feature of Memmert ovens, incubators, and climate chambers in laboratory and light-industrial settings. Memmert equipment exemplifies functional design in its most elegant and hygienic form, while still being scratch resistant, robust and durable.

      Stainless steel is the ideal material for temperature control chambers and heating baths. It is particularly corrosion-resistant, hygienic, robust and recyclable without question.

      Wherever Memmert ovens and heating baths are used, the superiority of high-quality stainless steel is undeniable in comparison to others that utilize coated sheet steel, which can corrode very quickly when in constant use.

      For the outer housing of all Memmert appliances, textured stainless steel is used (rear walls are zinc-plated sheets). The inner chamber, sliding shelves/grids, housing, interior basin and accessories for every heating bath, stainless steel of class W-St. 1.4301 (ASTM 304) is used. Since aggressive substances are frequently used in the vacuum drying oven, the inner chamber and thermoshelves are made of stainless-steel W-St. 1.4404 (ASTM 316L), and the tubing is made of stainless-steel W-St. 1.4571 (ASTM 316i).