Universal Oven UF110

The technologically perfected masterpiece made of high-quality, hygienic, easy-to-clean stainless steel leaves nothing to be desired in terms of ventilation and control technology, overtemperature protection and precisely tuned heating technology.

Enquire now
Category:

Temperature Specs:

  • Temperature: 1 Pt100 sensor DIN class A in 4-wire-circuit
  • Set temperature range: min.10°C above ambient up to +300°C
  • Resolution of display for setpoint values 0.1°C up to 99.9°C, 0.5°C from 100°C and for actual values
    0.1°C (LED)
  • Safety:

    • Temperature control: adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class
      1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
    • Auto diagnostic system: for fault analysis

    Electrical data

    230 Volts
    • (+ / – 10%)
    • 50/60 Hz / 12.2 amps
    115 Volts
    • (+ / – 10%)
    • 50/60 Hz / 19.1 amps
    • Stainless Steel Interior:

      • Volume Approx: 3.8 ft³ 108 L
      • Width: 22.0 in / 560 mm
      • Height: 18.9 in / 480 mm
      • Depth: 15.7 in / 400 mm
      • Number of Stainless Steel Grids (Standard Equipment): 2
      • Maximum Number of Grids: 5
      • Maximum Loading per Grid: 66 lb / 30 kg
      • Maximum Loading of Chamber: 386 lb / 175 kg

      Stainless Steel

      For many years exterior textured stainless steel has been the unmistakable feature of Memmert ovens, incubators, and climate chambers in laboratory and light-industrial settings. Memmert equipment exemplifies functional design in its most elegant and hygienic form, while still being scratch resistant, robust and durable.

      Stainless steel is the ideal material for temperature control chambers and heating baths. It is particularly corrosion-resistant, hygienic, robust and recyclable without question.

      Wherever Memmert ovens and heating baths are used, the superiority of high-quality stainless steel is undeniable in comparison to others that utilize coated sheet steel, which can corrode very quickly when in constant use.

      For the outer housing of all Memmert appliances, textured stainless steel is used (rear walls are zinc-plated sheets). The inner chamber, sliding shelves/grids, housing, interior basin and accessories for every heating bath, stainless steel of class W-St. 1.4301 (ASTM 304) is used. Since aggressive substances are frequently used in the vacuum drying oven, the inner chamber and thermoshelves are made of stainless-steel W-St. 1.4404 (ASTM 316L), and the tubing is made of stainless-steel W-St. 1.4571 (ASTM 316i).